PACK Built-in solar panel camera trap
+ Memory card
+ Batteries

ALL INCLUSIVE PACK PIE1060
1 PIE1060 camera trap + 4 AA batteries
+ 1 memory card 32 GB
The PIE1060 camera trap offers you:
Almost unlimited outdoor autonomy thanks to the integrated high-performance solar panel
the ability to make settings and download photos and videos remotely thanks to the Wi-Fi function

Features of the PIE1060 Wi-Fi camera trap
The Wi-Fi function allows remotely and thanks to the free application (Android/iOS):
View, download or delete recorded photos and videos
take photos or videos
change product settings
check the power level and remaining memory capacity
The device creates its own Wi-Fi network.
The Wi-Fi function is activated via Bluetooth from a smartphone.

Solar panel with built-in rechargeable lithium battery:
3.7 V - 4400 mAh
The solar panel battery can be recharged by solar energy or with the supplied USB cable.
The camera first uses the energy of the solar panel before using the energy of the batteries (if you have installed any).
Field of view: 80°
PIR sensor (motion/heat detector):
Detection angle: 60°
Detection distance: approx. 23 m
Adjustable sensitivity: High | Average | Weaken
Infrared flash:
36 invisible LEDs | Wavelength: 940 nm
Flash range: approx. 30m
Infrared flash with automatic activation depending on brightness
Adjustable infrared flash power: Auto | Average | Low | OFF
Ultra-fast trigger speed: approx. 0.3 seconds
Capture modes:
Photo: 1 to 10 photos per trigger
Video: programmable duration from 5 seconds to 3 minutes
Photo + Video: a photo and then a video are taken at each trigger

Image sensor: 5 Mega Pixels color CMOS
Photo resolution: 2 MP / 4 MP / 8 MP / 12 MP / 16 MP / 20 MP / 24 MP / 30 MP
Programmable shutter speed: 1/15 | 1/20 | 1/30
Photo File Format: JPEG
Video resolution: 368p / 480p / HD 720p / Full HD 1080p / Full HD 1296p / 2K
Frames per second: 30 fps (frames per second)
Audio recording in programmable video (ON | OFF)
Video File Format: MPEG-4
PIR detection mode: the camera takes photos and/or videos when the PIR (motion/heat sensor) sensor detects activity in the area it covers
Time Lapse mode: Photos and/or videos are taken automatically at regular time intervals. In this mode, the PIR sensor is disabled (there is no motion/heat detection).
User-programmable operating ranges
Timestamp on photos/videos: date, time, ambient temperature, lunar phase, solar panel energy level, camera name
Memory: micro SD card of 256 GB maxium, U1 class 10 minimum
Night capture in case of low energy level: 2 possible settings
No infrared flash: at night, if the energy level is too low, the camera will take photos/videos without triggering the flash.
No capture: at night, if the energy level is too low, the camera will no longer take photos or videos. It will only take daylight.
Programmable Device Identification Number: Identifies where and by which device a photo was taken.
Programmable password
Loop recording to the programmable memory card: If this setting is set to ON, when the memory card is full, the camera continues to record photos/videos by deleting the oldest files.
Padlock slot on camera housing
Reliable and efficient
Warranty: 2 years
Designed to withstand the weather (IP66)
Trigger speed: approx. 0.3 seconds
Ergonomics of the PIE1060 Wi-Fi camera trap
Weight: 433 g (without batteries) | 525 g (with batteries)
Dimensions: 143 x 107 x 95 mm
Power: integrated solar panel and/or 4 alkaline AA batteries or 4 rechargeable AA Ni-MH batteries
Standby time:
Outdoor: almost unlimited thanks to the integrated solar panel
Indoors: about 18 months
LCD Display: 2" Color TFT Display | 320 x 240 (RVB)
Mini USB 2.0 port (file download + solar panel charging point)
Free mobile app name (iOS/Android): PIE1060
DESCRIPTION:
1 PIE1060 camera trap
1 memory card 32 GB
4 AA alkaline batteries (LR06)
1 USB cable
1 wall mounting system
1 nylon fastening strap
1 user guide
SPECIAL PRICE : 229.90 € TTC - DELIVERY INCLUDED - DELIVERY METROPOLITAN FRANCE (EXCLUDING CORSICA)
DELIVERY WITHIN EIGHT
